Home

Mesh Sheets and Offcuts
Mesh Sheets and Offcuts - Image 2
Mesh Sheets and Offcuts - Image 3
Mesh Sheets and Offcuts - Image 4
Mesh Sheets and Offcuts - Image 5
Mesh Sheets and Offcuts - Image 6
Mesh Sheets and Offcuts - Image 7
Mesh Sheets and Offcuts - Image 8
Mesh Sheets and Offcuts - Image 9
Mesh Sheets and Offcuts - Image 10
Mesh Sheets and Offcuts - Image 11
Mesh Sheets and Offcuts - Image 12
Mesh Sheets and Offcuts - Image 13
Mesh Sheets and Offcuts - Image 14

Mesh Sheets and Offcuts

Available as a raw material for your projects.  Can be used for quick installation of paths, ramps, decks, walkways etc. Can be placed direct onto prepared ground over weed-mat with panels attached to each-other (fittings available) and gain the advantage of following a ground contour. Can be used on-ground for erosion control at the base of surface drains and easements. Can be screwed to joists or a complete sub-frame. Click for more info and Catalogue Stock and Price List

Category:

Description

2026-08-03-StepUp-Stock-List-Mesh.pdf

Non-slip grit surface

FRP material (type of Fibreglass) – will not rot, rust or be eaten by termites

Panel size – Standard width is 1220mm and length varies from 300mm to around 1600mm (depending on stock). Being offcuts, each panel has one raw cut edge – which can be trimmed back to next rib, or simply laid against next sheet factory edge.

Thickness – 30mm  and 38mm most commonly – availability depends on stock.

Colour – light grey or dark grey (depending on stock)

Aperture size – (depending on stock)

  • Micro-mesh 8mm openings
  • Mini-mesh 12mm openings
  • Covertop – no openings – full non-slip surface covering the mesh

StepUp can supply composite joists or subframe members eg bearers, posts etc – See Structural Posts, Beams as well as Square and Rectangular Hollow Sections

Minimum order $100

Related products